Drapery

Draperies

To Measure for Pinch Pleated Drapes on a standard traverse rod. Measure the front length of the traverse rod from one side to the other. Than measure the return length from the front of the rod to the wall on each side. To measure for length place the tape at the very top of the rod and measure all the way down to the floor, or to the desired length if you do not want full length drapery.

On a one way draw you just need to note on the order form whether it is a right or left draw, and only input the one return length.

With a decorative rod you will measure from directly below the rod to your desired length. Back to Measuring Home